1122-1998 IEEE Standard for Digital Recorders for Measurements in High-Voltage Impulse Tests



Publisher: Inst of Elect & Electronic

Written in English
Published: Downloads: 865
Share This

Subjects:

  • Electronics & Communications Engineering,
  • Reference works,
  • Technology: General Issues,
  • Reference,
  • Technology,
  • Science/Mathematics

@article{osti_, title = {Digital techniques in high-voltage measurements}, author = {Malewski, R}, abstractNote = {A review of digital techniques and instruments developed and applied to high-voltage measurements is presented. Advantages of digital instruments over their analog homologues are exposed together with some examples of processing of digitized signals recorded in HV laboratories. IEEE/PES TRANSFORMERS COMMITTEE. MEETING. Octo Orlando, Florida IEEE/PES TRANSFORMERS COMMITTEE MEETING Three-Phase, with High Voltage 34 Volts and below, Low Voltage Y/ and Y/ Volts - Requirements” IEEE Standard - IEEE Guide for the Reclamation of Insulating Oil And Criteria for its Use. No. IEEE Standards. 1: IEEE C ( kV to 38 kV rated grounding and testing devices used in enclosures): 2: IEEE C (Calibration of antennas used for radiated emission measurements in electromagnetic interference (EMI) control: 3: IEEE and (Common mezzanine card (CMC) family and physical and environmental layers for PCI mezzanine cards (PMC). IEEE Standard 81TM – IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface test measurements 4. CANA High Voltage Ltd. 1 IEEE PES Std Tutorial Not a Simple World • Measurements always come.

Main IEEE Guide for Transformer Impulse Tests (Ieee Std C) IEEE Guide for Transformer Impulse Tests (Ieee Std C) Year: This part of IEC is applicable to digital recorders, including digital oscilloscopes, analogue oscilloscopes and peak voltmeters used for measurements during tests with high impulse voltages and high impulse currents. It specifies the measuring characteristics and calibrations required to meet the measuring uncertainties and procedures specified in IEC IEEE Std ™ (Revision of IEEE Std ) TM IEEE Standard Test Procedure for Polyphase Induction Motors and Generators 3 Park Avenue, New York, NY , USA IEEE Power Engineering Society Sponsored by the Electric Machinery Committee 4 November Print: SH PDF: SS Authorized licensed use limited to: Iowa State. IEEE Std ™ (Revision of IEEE Std /Incorporates IEEE Std /Cor) IEEE Guide for the Design and Installation of Cable Systems in Substations Sponsor Substations Committee of the IEEE Power Engineering Society Approved 8 March IEEE-SA Standards BoardFile Size: 1MB.

outside of IEEE that have expressed an interest in participating in the development of the standard. Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Size: 2MB. - Dielectric tests with impulse voltages- Tests with impulse currents- Tests with combinations of the above- Capacitance and dielectric loss measurements This standard is applicable only to tests on equipment with a rated voltage above V. IEEE 82 Errata to IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors active, Most Current Buy Now. Details. History. IEEE Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations. Several definitions have been added to .

1122-1998 IEEE Standard for Digital Recorders for Measurements in High-Voltage Impulse Tests Download PDF EPUB FB2

Electrical measurements, performance testing, temperature tests, and miscellaneous tests are covered. - IEEE Standard for Digital Recorders for Measurements in High-Voltage Impulse Tests - IEEE Standard for Digital Recorders for Measurements in High-Voltage Impulse Tests Reaffirmed September Instructions are given for conducting and reporting the more generally applicable and acceptable tests to determine the performance characteristics of polyphase induction motors and generators.

There are presently two standards that deal with digital recorders for measurements in high-voltage impulse tests: IEEE Std. (revision of IEEE Std. ) and IEC document (a revision is being prepared based on IEEE Std.

The IEEE WG and CIGRE WG coordinated the technical studies on which the standards were by: To describe the necessary tests to be performed on digital recorders to ensure they meet the requirements of ANSI/IEEE Std.4 Purpose To simplify the existing standard and to bring it into alignment with the new proposals in the revision of ANSI/IEEE Std.

This standard defines the terms specifically related to the digital recorders used for monitoring high-voltage and high-current impulse tests, specifies the necessary performance characteristics for such digital recorders to ensure their compliance with the requirements for high-voltage and high-current impulse tests, and describes the tests and procedures that are necessary to show that these.

The object of this standard is to define the terms specifically related to the digital recorders used for monitoring high-voltage (HV) and high-current impulse tests, to specify the necessary performance characteristics for such digital recorders in order to ensure their compliance with the requirements for high-voltage and for high-current impulse tests, and to indicate the tests and.

Request PDF | Standards for digital recorders for measurements in high-voltage impulse tests | The background to the first standards for digital recorders for high-voltage impulse measurements is.

IEEE Standard for Digital Recorders for Measurements in High-Voltage Impulse Tests. Standard Techniques for High-Voltage Testing. A Fuzzy ARTMAP Fault Classifier for Impulse Testing of Power Transformers”Author: Baudilio Valecillos and Jorge Ramírez.

Applies to digital recorders, including digital oscilloscopes, analogue oscilloscopes and peak voltmeters used for measurements during tests with high impulse voltages and high impulse currents.

Also gives the measuring characteristics and calibrations required to meet the measuring uncertainties and procedures specified in IEC 您的位置: 首页 > 国外标准 > 国际电工协会IEEE > IEEE (R) Digital Recorders for Measurements in High-voltage Impulse Tests. Abstract: This standard establishes standard methods to measure high-voltage and basic testing techniques, so far as they are generally applicable, to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltags, switching impulse voltages, and impulse currents.

This revision implements many new procedures to improve accuracy, provide greater flexibility, and. Abstract: A test procedure for impulse testing of insulated conductors (cables) and cables with accessories installed (cable systems) is provided in this standard.

This procedure can be used as a design or qualification test for cables or for cable systems. This test procedure is not intended to replace any existing or future standards covering cable or cable accessories, impulse generators. Digital Recorders, Software and Calibrators In book: High Voltage Measurement Techniques, pp Performance progress and calibration of digital recorder for impulse voltage tests.

Get this from a library. IEEE Standard for Digital Recorders for Measurements in High-Voltag Impulse Tests. Abstract: Standard methods and basic techniques for high-voltage testing applicable to all types of apparatus for alternating voltages, direct voltages, lightning impulse voltages, switching impulse voltages, and impulse currents are established in this standard.

Sections that deal with alternating voltage, direct voltage, and impulse testing are combined in this revision to organize the. with definitions made in other IEEE standards. Several terms need to be defined, however, and IEEE seeks volunteers for the harmonizing of definitions. When the signal to measure is supplied from a perfectly stable waveform generator, results displayed by one instrument may be very close to those obtained by others.

However,File Size: KB. ieee c recommended practice for partial discharge measurement in liquid-filled power transformers and shunt reactors: ieee digital recorders for measurements in high-voltage impulse tests, ansi c 81(r) electrical analog indicating instruments, requirements for.

Digital recorders with computer-aided processing of the recorded data are nowadays the preferred measuring instruments on the low-voltage side.

Important characteristics of the complete high-voltage impulse measuring system are its transfer behaviour and its linearity up to the maximum applied by: 2. Abstract: This IEEE standard establishes standard methods of measurement of HV and basic testing techniques for application to all types of apparatus.

The first section defines terms and presents general requirements regarding tests. Section 2 defines terms relating to the specific tests and describes methods for generation and measurement of voltages and currents.

Digital recorders and digital oscilloscopes used for measurements during tests with high-impulse voltages and high-impulse currents are considered.

Terms specifically related to the digital recorders used for monitoring high-voltage and high-current impulse tests are defined.

The performance characteristics for such recorders, necessary to ensure their compliance with the requirements for. Get this from a library. IEEE standard for digital recorders for measurements in high-voltage impulse tests. [Institute of Electrical and Electronics Engineers.; IEEE Power Engineering Society.

Power System Instrumentation and Measurements Committee.; American National Standards Institute.]. Voltage ratings and taps IEEE Std PCx IEEE STANDARD FOR STANDARD GENERAL REQUIREMENTS FOR LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS impulse tests on high-voltage windings regardless of whether or not such tests File Size: KB.

guide for transformer impulse tests: ieee digital recorders for measurements in high-voltage impulse tests, ansi c transformers - pad-mounted, compartmental-type, self-cooled three-phase distribution transformers with high-voltage bushings, kva and smaller: high voltage, 34 grd y/19 volts and below.

This paper describes the development of a kV standard full lightening impulse measurement system. The high-voltage (HV) arm of the impulse resistive divider was constructed with an air.

Scope: This amendment is applicable to dielectric tests with alternating voltages and impulse voltages, when testing an apparatus with air gaps up to 1 meter in length.

It specifies correction factors for air density and humidity, which may be applied when the specific apparatus standard allows. This amendment is to be applied in conjunction with IEEE StdIEEE Standard Techniques for.

High-voltage (HV) tests and measurements are applied for two different reasons on site: When new equipment or systems are finally assembled on site, a quality acceptance test, usually a HV. IEEE Std. () This standard defines the requirements for digital recorders for measurements in high voltage impulse tests.

IEEE Std. C () This standard describes the recommended practice for routine impulse test for liquid-immersed, single and three-phase distribution transformers. IEEE Std. C ()Cited by: 8. • IEC High-voltage test techniques –Part 1: General definitions and test requirements • IEC High-voltage test techniques –Part 2: Measuring systems • IEC Recommendations for voltage measurement by means of standard air gaps 6 IEEE Std.

4 Includes Information Also Covered in the Following IEC Standards File Size: 1MB. bs iec/ieee ed - high-voltage switchgear and controlgear - part alternating-current generator circuit-breakers: ieee digital recorders for measurements in high-voltage impulse tests, ieee draft c d6 • IEC High-voltage test techniques –Part 1: General definitions and test requirements • IEC High-voltage test techniques –Part 2: Measuring systems • IEC Recommendations for voltage measurement by means of standard air gaps 6 IEEE Std.

4 Includes Information Also Covered in the Following IEC Standards File Size: KB. WG P “IEEE Standard for the Digital Recorders for Measurements in High-Voltage Impulse Tests” Chaired by Jeff Britton (Phenix Technologies), with Secretary Tom Melle (Highvolt).

This group met and reviewed the overall uncertainty requirements on digital recorders as stated in IEEEand compared these to the requirements stated.From these results, the required characteristics for the digital measuring system to satisfy the IEC Draft on digital recorders for measurement in high-voltage impulse test techniques are shown.您的位置: 首页 > 国外标准 > 国际电工协会ieee > ieee 高电压脉冲测试中测量用数字记录器 国内标准 化工HG.